Oracle 10g R2 Automatic Storage Management on CentOS 4.1 (RHEL AS 4 U1)

The target of publication is to highlight the optimal sequence of steps
required to bring Oracle10g (10.2.0.1) ASM-database up on CentOS4.1,
placing ASM instance and serviced databases in different Oracle Homes.
Oracleasm library install is done immediately after creating "oracle"
linux account and "dba" group to be ready for ASM Instance creating during
the first Installer run supposed to build it. ASM instance for disks and disk’s
group management is created the first by Installer along with the disk’s group
for database supposed to be built during the second run of Installer and to be
placed into recently created disk’s group.

I. Oracle 10gR2 ASM and ASMLib 2.0 I/O.

1.Install CentOS 4.1 (just everything about 6 GB)

2.Run as root:

# groupadd dba          # group of users to be granted SYSDBA system privilege
# groupadd oinstall     # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/wtfdata
# chown -R oracle.oinstall /u02
  

OTN instruction:-
Before installing Automatic Storage Management, it is recommended that you install
the optional add-on Automatic Storage Management support library, ASMLib.
ASMLib is an application program interface (API) Oracle that is aimed at simplifying
the interface between the operating system and the database, and to exploit
the capabilities and strengths of storage arrays provided by different vendors.
ASMLib provides an alternative interface for the Automatic Storage Management-enabled kernel to discover and access block devices. It provides storage and operating system vendors the opportunity to supply extended storage-related features.
These features provide benefits such as improved performance and greater data integrity.
OTN instruction ends.


3.To install ASMLIB 2.0 run as root:-

# rpm -Uvh oracleasm-2.6.9-11.ELsmp-2.0.0-1.i686.rpm             oracleasmlib-2.0.0-1.i386.rpm             oracleasm-support-2.0.0-1.i386.rpm
  

Now you get /etc/init.d/oracleasm ready to go.

Configuring the Oracle ASM library driver:-

# /etc/init.d/oracleasm configure
Default user to own the driver interface [oracle]: oracle
Default group to own the driver interface [dba]: dba
Start Oracle ASM library driver on boot (y/n) [y]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: [  OK  ]
Scanning system for ASM disks: [  OK  ]
  

# /etc/init.d/oracleasm enable
  

Create ASM disks as desired utilizing command:

# /etc/init.d/oracleasm createdisk VLM0X /dev/sdx
  

Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login, /etc/profile
and oracle's shell environment as advised in [1].

Login as oracle:-

$ cd /tmp/database
$./runInstaller
  

OTN instructions:-
It’s recommended that you install Automatic Storage Management in its own Oracle home, regardless of whether you plan to only have one or multiple database instances.
Installing Automatic Storage Management in its own Oracle home helps ensure higher
availability and manageability.With separate Oracle homes, you can upgrade Automatic Storage Management and databases independently, and you can remove database software without impacting the Automatic Storage Management instance. Ensure that the Automatic Storage Management version is the same or later than the Oracle Database version.If an Automatic Storage Management installation does not already exist and you select the Oracle Universal Installer option to install and configure Automatic Storage Management only, then Oracle Universal Installer installs Automatic Storage Management in its own Oracle home.
OTN instruction ends.



Select option "Advanced installation" and create ASM instance in
ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1.
Create first disk group on the box during this run . Exit installer.

$ ./runInstaller
  

Select option "Advanced installation" and create new ASM-database placed into existing disk's group
in ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_2 .
Modify ~oracle/.bash_profile correspondently. Relogin as oracle.

Next:-

$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.

Total System Global Area  285212672 bytes
Fixed Size                  1218968 bytes
Variable Size              88082024 bytes
Database Buffers          188743680 bytes
Redo Buffers                7168000 bytes
Database mounted.

SQL> alter database archivelog;
Database altered.
SQL> alter database MastDB flashback on;
Database altered.
SQL> alter database open;
Database altered.
   
  

Open Enterpise Manager console.(Enterprise Manager 10g Database Control URL

http://ServerCentOS41:1158/em). Create new disk's group for flashback

recovery area and modify corresponding value on Recovery Settings page of EM.

# !/bin/bash
###################
# lsnrstart script
###################
export ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1
lsnrctl start
export ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_2
lsnrctl start
 

System startup in this case should look like:-

[oracle@ServerCentOS41 ~]$ ./lsnrstart 
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:41
Copyright (c) 1991, 2005, Oracle.  All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1521)))
------------------------
STATUS of the LISTENER
------------------------
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date                30-AUG-2005 17:57:42
Uptime                    0 days 0 hr. 0 min. 0 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File         /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
  Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully

LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:42
Copyright (c) 1991, 2005, Oracle.  All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_2/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1522)))
------------------------
STATUS of the LISTENER
------------------------
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date                30-AUG-2005 17:57:42
Uptime                    0 days 0 hr. 0 min. 0 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Listener Log File         /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening Endpoints Summary...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
  Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
   

[oracle@ServerCentOS41 ~]$ dbstart

Processing ASM instance "+ASM": log file /u01/app/oracle/product/10.2.0/db_1/startup.log
Processing Database instance "MastDB": log file /u01/app/oracle/product/10.2.0/db_2/startup.log
[oracle@ServerCentOS41 ~]$ emctl start dbconsole

TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation.  All rights reserved.
http://ServerCentOS41:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control .............. started.
-------------------------------------------------------------------------------
Logs are generated in directory /u01/app/oracle/oracle/product/10.2.0/db_2/ServerCentOS41_MastDB/sysman/log
   

Install described above was done with different Oracle Homes

for ASM instance and ASM-database.

To put ASM instance and ASM-database in same Oracle Home.

Start runInstaller just once to build all stuff at a time.

Login as oracle:-

$ cd /tmp/database
$./runInstaller
   

Select option "Advanced option" and install "Software only"

in ORACLE_HOME - /u01/app/oracle/oracle/product/10.2.0/db_1.
Modify oracle's .bash_profile:-
export ORACLE_HOME and new PATH.
Source new .bash_profile:-

$. ~oracle/.bash_profile
$dbca
   

During this run the request to start CSS daemons by root will come up.

# $ORACLE_HOME/bin/localconfig add
   

ASM instance , needed disk's groups and ASM-database itself will be created.
Then perform listener and local TNS names configuration.

$netca
   

II. Oracle 10gR2 ASM and Standard Linux I/O.


This method creates Oracle database files on raw character devices managed by ASM
using standard Linux I/O system calls.It requires to create RAW devices for all
disk partitions used by ASM.


1.Install CentOS 4.1 (just everything about 6 GB)

2.Run as root:

 
# groupadd dba          # group of users to be granted SYSDBA system privilege
# groupadd oinstall     # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/data
# chown -R oracle.oinstall /u02
  

Just as an example create 4 partitions:

/dev/hda6,/dev/hdc6 5 GB each one

/dev/hda7,/dev/hdc7 3 GB each one

Create raw devices modifying file /etc/sysconfig/rawdevices as follows:

/dev/raw/raw1 /dev/hda6

/dev/raw/raw2 /dev/hdc6

/dev/raw/raw3 /dev/hda7

/dev/raw/raw4 /dev/hdc7

Put in /etc/rc.d/rc.local

chown oracle:dba /dev/raw/raw*

chmod 660 /dev/raw/raw*

I was experiencing problems with loosing "oracle:dba" permissions after Linux
reboot. Oracle's raw device came up with "root:disk" ownership after reboot.


Restart Linux

Run as root:-

# service rawdevices restart
   

Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login,

/etc/profile and oracle's shell environment as advised in [1].



Login as oracle:-

 
$ cd /tmp/database
$./runInstaller
   

Select " Advanced installation" and
create ASM instance in ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/asm
During this run create diskgroup RAWDATA1 with normal redundancy
mirroring /dev/raw/raw1 and /dev/raw/raw2.You should be fine with discovering raw devices unless permissions "oracle:dba" are lost
Exit installer.

Export ORACLE_HOME for ASM instance and corresponding PATH.
Then run "dbca" to create diskgroup RAWDATA2 with
normal redundancy mirroring /dev/raw/raw3 and /dev/raw/raw4

  
$ ./runInstaller
   

Select " Advanced installation" and create new ASM-database placed RAWDATA1 diskgroup

in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1.
Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
Next:-

  
$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area  285212672 bytes
Fixed Size                  1218968 bytes
Variable Size              88082024 bytes
Database Buffers          188743680 bytes
Redo Buffers                7168000 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database rawdbs flashback on;
Database altered.
SQL> alter database open;
Database altered.
  

Open Enterpise Manager console.(Enterprise Manager 10g Database Control

URL http://ServerCentOS41:1158/em). Put flashback recovery area in RAWDATA2

modifying corresponding value on Recovery Settings page of EM.



References.

1.www.puschitz.com/InstallingOracle10g.shtml

On-line disaster-Recovery Procedure for crashed IBM Informix Enterprise Replication Server 9.2(3,4)

Assume that g_cp ,g_fw ,g_tp ,g_sc are Enterprise Replication servers participating in Update Anywhere Enterprise Replication. All of them are based Informix Dynamic Server 9.2UC2 Hardware platform: RS/6000,AIX 4.3 (4 CPU’s, 2 GB of RAM).
Server_xx is a host name for corresponding ER Server g_xx and corresponds entry
in SQLHOSTS file on each one of ER servers.At certain point of time ER server g_cp crashes(we presume that Informix Dynamic Server on server_cp is still alive, otherwise first delete is not necessary),then issue on server_cp:

informix@server_cp$ cdr delete server g_cp
issue on server_tp (or any other g_cp,g_fw,g_sc):
informix@server_tp$ cdr delete server g_cp -connect server_tp
 

The first command removes ER server from local global catalog
and removes the ER connections to others hosts.
The second command removes ER server from all other syscdr
databases, i.e. from all other ER servers on the system

When server_cp is ready to go:-

informix@server_cp$ cdr def server  -connect  server_cp -I -S g_tp g_cp       -A   $INFORMIXDIR/ats   -R $INFORMIXDIR/ris

-A option defines Aborted Transaction Spooling Directory;
-R option defines Row Information Spooling Directory
   

Declare Replications on g_cp ,run script change_repl.ksh:-

#!/usr/bin/ksh
for TABLE in `cat table_list`
do
cdr change replicate  -a repl_${TABLE}  sitesdata@server_cp:informix.${TABLE}     "select * from ${TABLE}"
if [ $? == 0 ] then
  echo "repl _"${TABLE}" updated OK"
else
  echo "repl_"$(TABLE}" update failed"
  exit 1
fi
done
  

Start Replications on g_cp ,run script start_repl.ksh:-

#!/usr/bin/ksh
for TABLE in `cat table_list`
do
cdr start replication repl_${TABLE}  g_cp
if [ $? == 0 ] then
  echo "repl_"${TABLE}" started OK"
else
  echo "repl_"${TABLE}" start failed"
  exit 1
fi
done
 

Suspend all ER servers , run command:-

informix@server_cp$ cdr suspend server g_cp g_tp g_fw  g_sc
  

Since this moment all transactions will be queued but not replicated
Run script unload.ksh on server_tp (g_tp) :-

informix@server_tp$ nohup onpunload.ksh>unload.log 2>&1 &

#!/usr/bin/ksh
#####################################################################
# onpunload.ksh. Script invokes onpload utility 
# to unload data on any running ER  server
# For each TABLE  value in table_list file:
# unload job named unload_${TABLE} for each replicated table is already 
# created in HPL environment and stored in  onpload database. 
# Autogenerate Load Components panel  
# configured  output file as  /dataserver/unload/${TABLE}.dat, 
# target database name 
# as  "sitesdata" and table as ${TABLE}
#######################################################################
for TABLE in `cat table_list`
do
onpload –p sites –j   unload_${TABLE}  -fu
if [ $? == 0 ] then
  echo "repl_"${TABLE}" unloaded OK"
else
  echo "repl_"${TABLE}"unload failed"
  exit 1
fi
done
 

Compress all unloaded ASCII files ,create tar ball and download to
/dataserver/load on server_cp.Untar ball and uncompress *.Z files
in /dataserver/load directory on server_cp,
then run script to load data.

informix@server_cp$ nohup onpload.ksh>load.log 2>&1 &

#!/usr/bin/ksh
############################################################################### 
# onpload.ksh
# Script invokes onpload utility to load data on ER server
#  supposed to be synchronized.
# For each TABLE  value in table_list file:
# load job named load_${TABLE} for each replicated table is already created with 
# Deluxe  without replication menu option in High Performance Loader Environment 
# and stored  in onpload database. This feature became available since HPL v 9.2 
# Autogenerate Load Components panel  configured input file as #dataserver/load/
#${TABLE}.dat,
# target database  “sitesdata” and table as ${TABLE}
################################################################################
for TABLE in `cat table_list`
do
onpload –p sites  j –load_${TABLE}  -fcl
if [ $? == 0 ] then
  echo ${TABLE}" loaded OK"
else
  echo ${TABLE}" load failed"
  exit 1
fi
done
  

To start replication of queued transactions run command:-

   
     informix@server_tp$ cdr resume server g_cp g_tp g_fw  g_sc
  

Since this point system is passing through extremely dangerous phase.
Transaction rate could be very high on each one of ER servers involved
into Udate-Anywhere Enterprise Replication. Sizes of send and receive dbspaces
as well as total length Logical Logs should be tuned very carefully to accommodate
OLTP hit. LTXHWM must be more then 2*LTHWM, i.e long transaction should be
rollbacked before LTXHWM is reached.DDR threads could several times start and finish
catch up phase on g_cp (especially),g_fw,g_tp,g_sc.
This behavior is normal during synchronizing

Multithreaded HTTP Server for Linux built up by the pool of threads utilizing select()system call.

Developing code bellow we follow general guidelines from [1] chapter 11.
The only one source file has been modified is server.c.Instead of fork new process to handle each incoming client's connection, as procedure server_run ( ) does in [1], we start pool of 1024 threads accepting as parameter descriptor of passive socket.The procedure run by each thread is asynchronous BSD socket’s server utilizing select() system
call (see for example [2],chapter 13(5)) to switch between handling incoming client's requests by accept() system call
and receiving "http" requests from clients already connected to server utilizing procedures handle_request() and
handle_get() from [1],chapter 11.

References.

1.Mark Mitchel,Jeffrey Oldham,Alex Samuel. Advanced Linux Programming.

New Riders Publishing , 2001. www.advancedlinuxprogramming.com

2.Douglas E. Comer,David L. Stevens Internet Working with TCP/IP ,vol 3

Client-Server Programming and application Linux/Posix Socket Version,Prentice Hall,Inc. 2001

/*
 *   server.c  module :- multithreaded version, starting pool of threads,
 *   multiplexing select() system call, to serve new connections  
 *   utilizing accept() system call and "http" responds for clients 
 *   already connected to server simultaneously.
 */

#include <arpa/inet.h>
#include <assert.h>
#include <errno.h>
#include <netinet/in.h>
#include <signal.h>
#include <stdio.h>
#include <string.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <sys/wait.h>
#include <unistd.h>
#include <pthread.h>
#include "server.h"
#define NUM_THREADS 1024 

pthread_mutex_t get_mutex=PTHREAD_MUTEX_INITIALIZER;

static char* not_found_response_template =
  "HTTP/1.0 404 Not Found\n"
  "Content-type: text/html\n"
  "\n"
  "<html>\n"
  " <body>\n"
  "  <h1>Not Found</h1>\n"
  "  <p>The requested URL %s was not found on this server.</p>\n"
  " </body>\n"
  "</html>\n";
                                                                                
                                                                                
static char* bad_method_response_template =
  "HTTP/1.0 501 Method Not Implemented\n"
  "Content-type: text/html\n"
  "\n"
  "<html>\n"
  " <body>\n"
  "  <h1>Method Not Implemented</h1>\n"
  "  <p>The method %s is not implemented by this server.</p>\n"
  " </body>\n"
  "</html>\n";
static char* ok_response =
  "HTTP/1.0 200 OK\n"
  "Content-type: text/html\n"
  "\n";
                                                                                
static char* bad_request_response =
  "HTTP/1.0 400 Bad Request\n"
  "Content-type: text/html\n"
  "\n"
  "<html>\n"
  " <body>\n"
  "  <h1>Bad Request</h1>\n"
  "  <p>This server did not understand your request.</p>\n"
  " </body>\n"
  "</html>\n";

void
die(const char *func, int err)
{
        fprintf(stderr,"%s: %s\n",func,strerror(err));
        abort();
}

static void handle_get (int connection_fd, const char* page)
{
  struct server_module* module = NULL;
  if (*page == '/' && strchr (page + 1, '/') == NULL) {
    char module_file_name[64];
    snprintf (module_file_name, sizeof (module_file_name),
              "%s.so", page + 1);
    module = module_open (module_file_name);
  }
                                                                                
  if (module == NULL) {
    char response[1024];
    snprintf (response, sizeof (response), not_found_response_template, page);
    write (connection_fd, response, strlen (response));
  }
  else {
    write (connection_fd, ok_response, strlen (ok_response));
    (*module->generate_function) (connection_fd);
    module_close (module);
  }
}





static void *
handle_connection (int fdSock)
{
int connection_fd = fdSock;
  char buffer[256];
  ssize_t bytes_read;
  bytes_read = read (connection_fd, buffer, sizeof (buffer) - 1);
  if (bytes_read > 0) {
    char method[sizeof (buffer)];
    char url[sizeof (buffer)];
    char protocol[sizeof (buffer)];
                                                                                
    buffer[bytes_read] = '\0';
    sscanf (buffer, "%s %s %s", method, url, protocol);
    while (strstr (buffer, "\r\n\r\n") == NULL)
      bytes_read = read (connection_fd, buffer, sizeof (buffer));
    if (bytes_read == -1) {
      close (connection_fd);
      return;
    }
    if (strcmp (protocol, "HTTP/1.0") && strcmp (protocol, "HTTP/1.1")) {
      write (connection_fd, bad_request_response,
             sizeof (bad_request_response));
    }
    else if (strcmp (method, "GET")) {
      char response[1024];
      snprintf (response, sizeof (response),
                bad_method_response_template, method);
      write (connection_fd, response, strlen (response));
    }
    else
       handle_get (connection_fd, url);
  }
  else if (bytes_read == 0)
      ;
  else {
    system_error ("read");

   }
close(connection_fd);
}


void *
serv_request(void *insock)
{
int msock = (int)insock;
struct sockaddr_in fsin;
fd_set rfds;
fd_set afds;
unsigned int alen;
int fd,nfds;
int rval;
socklen_t address_length;
struct sockaddr_in socket_address;

nfds=getdtablesize();

FD_ZERO(&afds);
FD_SET(msock,&afds);

while(1) {
 memcpy(&rfds,&afds,sizeof(rfds));
 if (select(nfds,&rfds,(fd_set *)0,(fd_set *)0,(struct timeval *)0) < 0)
          die("select()",errno);
 if (FD_ISSET(msock,&rfds)) {
  int ssock;
  alen=sizeof(fsin);
  /*
   Serving new incoming client's connection
  */
  pthread_mutex_lock(&get_mutex);
    ssock=accept(msock,(struct sockaddr *)&fsin,&alen);
  pthread_mutex_unlock(&get_mutex);
  if (ssock < 0)
    die ("accept()",errno);
  if (verbose) {
      socklen_t address_length;
                                                                                
      address_length = sizeof (socket_address);
      rval = getpeername (ssock, &socket_address, &address_length);
      assert (rval == 0);
      printf ("Thread '%d' accepted connection from %s\n",
              pthread_self(),inet_ntoa (socket_address.sin_addr));
    }
  FD_SET(ssock,&afds);
}
for (fd=0;fd < nfds; ++fd)
 if (fd != msock && FD_ISSET(fd,&rfds)) {
  printf("Thread '%d' responding request...\n",pthread_self());
  /*
   Serving client had been already connected to server
  */
  handle_connection(fd);
  FD_CLR(fd,&afds);
  }
 }
}


void
server_run(struct in_addr local_address,uint16_t port)
{
struct sockaddr_in socket_address;
int rval;
int server_socket;
int k;
/*
Getting socket's descriptor to be passed to 
each thread in the pool
*/
  server_socket = socket (PF_INET, SOCK_STREAM, 0);
  if (server_socket == -1)
    system_error ("socket");
  memset (&socket_address, 0, sizeof (socket_address));
  socket_address.sin_family = AF_INET;
  socket_address.sin_port = port;
  socket_address.sin_addr = local_address;
  rval = bind (server_socket, &socket_address, sizeof (socket_address));
  if (rval != 0)
    system_error ("bind");
  rval = listen (server_socket, 10);
  if (rval != 0)
    system_error ("listen");
 if (verbose) {
    socklen_t address_length;
    address_length = sizeof (socket_address);
    rval = getsockname (server_socket, &socket_address, &address_length);
    assert (rval == 0);
    printf ("server listening on %s:%d\n",
            inet_ntoa (socket_address.sin_addr),
            (int) ntohs (socket_address.sin_port));
  }

/*
Starting pool of threads building up HTTP server
*/

size_t stacksize;
pthread_t p_thread[NUM_THREADS];
pthread_attr_t attr;
   pthread_attr_init(&attr);
   stacksize = 500000;
   pthread_attr_setstacksize (&attr, stacksize);
   pthread_attr_getstacksize (&attr, &stacksize);

for(k=0; k<NUM_THREADS; k++){
pthread_create(&p_thread[k],&attr,serv_request,(void*)server_socket);
}
                                                                                        
pthread_attr_destroy(&attr);

for(k=0;k<NUM_THREADS;k++) {
        pthread_join(p_thread[k], NULL);
        printf("Completed join with thread %d\n",k);
      }
}

Multithreaded RPC Server in White Box Linux 3 environment

This can be considered an example, as shown in reference [1] chapter "Sun RPC".
This is the file square_svc.c for file square.x to build a multithreaded
RPC Server for White Box Linux 3.File square.x (as in reference [1]):

struct square_in {
 long arg1;
};
struct square_out {
 long res1;
};
program SQUARE_PROG {
  version SQUARE_VERS {
  square_out SQUAREPROC(square_in) = 1;
  } = 2 ;
} = 0x31230000;
  

Call rpcgen to generate servers, client stubs, header file square.h
and square_xdr.c. Remember key -A is not supported under Linux.
That is why we have an issue (compare with SunOS).

$ rpcgen –a –M square.x
  

Server's side procedures code:

/*
*                                           ServerSideProc.c
*/
#include "square.h"
#include <stdio.h>
#include <stdlib.h>
#include <rpc/pmap_clnt.h>
#include <string.h>
#include <memory.h>
#include <sys/socket.h>
#include <netinet/in.h>

int request=0;

bool_t

squareproc_2_svc(square_in *inp,square_out *outp,struct svc_req *rqstp)
{
printf("Thread id = '%ld' started, arg = %d\n",pthread_self(),inp->arg1);
sleep(5);
outp->res1=inp->arg1*inp->arg1;
printf("Thread id = '%ld' is done %d \n",pthread_self(),outp->res1);
return(TRUE);
}
int 
square_prog_2_freeresult(SVCXPRT *transp,xdrproc_t xdr_result,
 caddr_t result)
{
xdr_free(xdr_result,result);
return(1);
}
 

Modified code square_svc.c:

/*            square_svc.c
 *
 * Please do not edit this file.
 * It was generated using rpcgen.
 */
#include "square.h"
#include <stdio.h>
#include <stdlib.h>
#include <rpc/pmap_clnt.h>
#include <string.h>
#include <memory.h>
#include <sys/socket.h>
#include <netinet/in.h>
#ifndef SIG_PF
#define SIG_PF void(*)(int)
#endif

struct thr_data
{
struct svc_req *rqstp;
SVCXPRT *transp;
} ;

pthread_t p_thread;
pthread_attr_t attr;
/* Procedure to be run by thread */

void *
serv_request(void *data)
{
struct thr_data *ptr_data = (struct thr_data *)data;
{
   union {
                square_in squareproc_2_arg;
   } argument;
   union {
                square_out squareproc_2_res;
   } result;
   bool_t retval;
   xdrproc_t _xdr_argument, _xdr_result;
   bool_t (*local)(char *, void *, struct svc_req *);
struct svc_req *rqstp = ptr_data->rqstp;
register SVCXPRT *transp = ptr_data->transp;
        switch (rqstp->rq_proc) {
        case NULLPROC:
                (void) svc_sendreply (transp, (xdrproc_t) xdr_void, (char *)NULL);
                return;
        case SQUAREPROC:
                _xdr_argument = (xdrproc_t) xdr_square_in;
                _xdr_result = (xdrproc_t) xdr_square_out;
                local = (bool_t (*) (char *, void *,  struct svc_req *))squareproc_2_svc;
                break;
        default:
                svcerr_noproc (transp);
                return;
        }
        memset ((char *)&argument, 0, sizeof (argument));
        if (!svc_getargs (transp, (xdrproc_t) _xdr_argument, (caddr_t) &argument)) {
                svcerr_decode (transp);
                return;
        }
        retval = (bool_t) (*local)((char *)&argument, (void *)&result, rqstp);
 if (retval > 0 && !svc_sendreply(transp, (xdrproc_t) _xdr_result, (char *)&result))
   {
                svcerr_systemerr (transp);
       }
        if (!svc_freeargs (transp, (xdrproc_t) _xdr_argument, (caddr_t) &argument)) {
                fprintf (stderr, "%s", "unable to free arguments");
                exit (1);
        }
        if (!square_prog_2_freeresult (transp, _xdr_result, (caddr_t) &result))
                fprintf (stderr, "%s", "unable to free results");
        return;
}
}
/* 
New code for square_prog_2
*/
static void
square_prog_2(struct svc_req *rqstp, register SVCXPRT *transp)
{
struct data_str
{
struct svc_req *rqstp;
SVCXPRT *transp;
} *data_ptr=(struct data_str*)malloc(sizeof(struct data_str));
{
data_ptr->rqstp = rqstp;
data_ptr->transp = transp;
pthread_attr_setdetachstate(&attr,PTHREAD_CREATE_DETACHED);
pthread_create(&p_thread,&attr,serv_request,(void *)data_ptr);
 }
}
int
main (int argc, char **argv)
{
 register SVCXPRT *transp;
 pmap_unset (SQUARE_PROG, SQUARE_VERS);
 transp = svcudp_create(RPC_ANYSOCK);
 if (transp == NULL) {
  fprintf (stderr, "%s", "cannot create udp service.");
  exit(1);
 }
 if (!svc_register(transp, SQUARE_PROG, SQUARE_VERS, square_prog_2, IPPROTO_UDP)) {
  fprintf (stderr, "%s", "unable to register (SQUARE_PROG, SQUARE_VERS, udp).");
  exit(1);
 }
 transp = svctcp_create(RPC_ANYSOCK, 0, 0);
 if (transp == NULL) {
  fprintf (stderr, "%s", "cannot create tcp service.");
  exit(1);
 }
 if (!svc_register(transp, SQUARE_PROG, SQUARE_VERS, square_prog_2, IPPROTO_TCP)) {
  fprintf (stderr, "%s", "unable to register (SQUARE_PROG, SQUARE_VERS, tcp).");
  exit(1);
 }
 svc_run ();
 fprintf (stderr, "%s", "svc_run returned");
 exit (1);
 /* NOTREACHED */
}
 

Compile ServerSQUARE:

$ gcc –o ServerSQUARE  ServerSideProc.c  square_svc.c square_xdr.c –lprthread    -lnsl
  

Client's side code:

/*          
 *                                  ClientSideProc.c
 */

#include "memory.h" /* for memset */
#include "square.h"
#include "stdio.h"
#include "stdlib.h"
#include "rpc/pmap_clnt.h"
#include "string.h"
#include "memory.h"
#include "sys/socket.h"
#include "netinet/in.h"

int 
main (int argc,char **argv)
{
CLIENT *cl;
square_in in;
square_out out;
if (argc != 3 )
{ printf ("Usage : client "hostname" "integer_valus=e"\n");
  exit(1);
}
cl = clnt_create(argv[1],SQUARE_PROG,SQUARE_VERS,"tcp");
 if (cl == NULL) {
                clnt_perror (cl, "call failed");
                exit (1);
        }
in.arg1 = atol(argv[2]);
if (squareproc_2(&in,&out,cl) != RPC_SUCCESS)
{
   printf (“%s\n” , clnt_perror (cl,argv[1] ));
   exit(1);
}
printf("result: %ld\n",out.res1);
exit(0);
}
 

Now compile ClientSQUARE:

$ gcc –o  ClientSQUARE  ClientSideProc.c  square_clnt.c  square_xdr.c    -lprthread     -lnsl
 

Testing (see [1], chapter “SUN RPC”):

[root@dell4500 SQWMT]# cat square.bsh

./ClientSQUARE dell4500.redhat 10 & ./ClientSQUARE dell4500.redhat 11 & ./ClientSQUARE dell4500.redhat 12 & ./ClientSQUARE dell4500.redhat 21 & ./ClientSQUARE dell4500.redhat 13 & ./ClientSQUARE dell4500.redhat 14 & ./ClientSQUARE dell4500.redhat 15 & ./ClientSQUARE dell4500.redhat 16 & ./ClientSQUARE dell4500.redhat 17 & ./ClientSQUARE dell4500.redhat 18 & ./ClientSQUARE dell4500.redhat 19 & ./ClientSQUARE dell4500.redhat 20 &
 

Output on client's side:

[root@dell4500 SQWMT]# ./square.bsh
[root@dell4500 SQWMT]# result: 196
result: 225
result: 256
result: 289
result: 121
result: 144
result: 441
result: 169
result: 100
result: 324
result: 361
result: 400
 

Output on Server's side:

[root@dell4501 SQWMT]# ./ServerSQUARE
Thread id = '1082453184' started, arg = 14
Thread id = '1090841664' started, arg = 15
Thread id = '1099230144' started, arg = 16
Thread id = '1116941120' started, arg = 17
Thread id = '1125329600' started, arg = 11
Thread id = '1133718080' started, arg = 12
Thread id = '1142106560' started, arg = 21
Thread id = '1150495040' started, arg = 13
Thread id = '1158883520' started, arg = 10
Thread id = '1167272000' started, arg = 18
Thread id = '1175660480' started, arg = 19
Thread id = '1184048960' started, arg = 20
Thread id = '1082453184' is done 196
Thread id = '1090841664' is done 225
Thread id = '1099230144' is done 256
Thread id = '1116941120' is done 289
Thread id = '1125329600' is done 121
Thread id = '1133718080' is done 144
Thread id = '1142106560' is done 441
Thread id = '1150495040' is done 169
Thread id = '1158883520' is done 100
Thread id = '1167272000' is done 324
Thread id = '1175660480' is done 361
Thread id = '1184048960' is done 400
 

References:

1. W. Richard Stevens UNIX: Network Programming v 2.Interprocess communications,
Prentice Hall,1999

Adding New Master Sites Without Quiescing the Master Group for Oracle10g 10.2.0.1 in CentOS 4.1 (RHEL AS 4 U1) environment

This technical exercise follows up known bug in 10.1.0.2.

All three databases are ASM in CentOS 4.1 environment

Establishing asynchronous multi-master replication between two sites completed OK.

Attempt to add third follows standard guidelines:-

Step1. Set up:

1.The replication administrator at new master site

2.A scheduled link from each existing master site to new master site

3.A scheduled link from new master site to each existing master site

4.A schedule purge job at new master site

Status OK



Step 2. CONNECT repadmin/repadmin@orcldata (MasterDef Site)

 
BEGIN
DBMS_REPCAT.SPECIFY_NEW_MASTERS (
gname => 'hr_repg',
master_list => 'qws3data');
END;
  

Status OK

Next step:-

 
variable masterdef_flashback_scn number;
variable extension_id varchar2(50);
BEGIN
DBMS_REPCAT.ADD_NEW_MASTERS (
export_required => true,
available_master_list => 'qws3data',
masterdef_flashback_scn => :masterdef_flashback_scn,
extension_id => : extension_id,
break_trans_to_masterdef => false,
break_trans_to_new_masters => false,
percentage_for_catchup_mdef => 80,
cycle_seconds_mdef => 60,
percentage_for_catchup_new => 80,
cycle_seconds_new => 60);
END;
   

PL/SQL procedure completed OK



select count(*) from DBA_REPCATLOG;

gives "0"



Create a directory object at each database.

CONNECT SYSTEM/drbrxa@qws3data;
CREATE DIRECTORY DPUMP_DIR AS '/usr/dpump_dir';
CONNECT SYSTEM/drbrxa@orcldata;
CREATE DIRECTORY DPUMP_DIR AS '/usr/dpump_dir';
   

Perform object-level export of tables at master definition database.

SELECT FLASHBACK_SCN FROM DBA_REPEXTENSIONS; 
    

497533

$export ORACLE_SID=orcldata
$expdp system/drbrxa TABLES=SCOTT.DEPT,SCOTT.EMP,DIRECTORY=DPUMP_DIR 
DUMPFILE=scott_tables.dmp CONTENT=data_only FLASHBACK_SCN=497533
    

Resume propagation at the master definition site.

CONNECT repadmin/repadmin@orcldata; (MasterDef Site)
BEGIN
DBMS_REPCAT.RESUME_PROPAGATION_TO_MDEF (
      extension_id => :extension_id);
END;
   

Transfer the export dump files to the new master site.

Perform object-level import at new master site.

$export ORACLE_SID=qws3data
$impdp system/drbrxa TABLES=SCOTT.DEPT,SCOTT.EMP, DIRECTORY=DPUMP_DIR 
DUMPFILE=scott_tables.dmp CONTENT=data_only TABLE_EXISTS_ACTION=append
   

Allow new masters to receive deferred transactions.

CONNECT repadmin/repadmin@qws3data; (Newly added site)
BEGIN
DBMS_REPCAT.PREPARE_INSTANTIATED_MASTER (
      extension_id  => :extension_id);
END;
   

Notice:-

Serial propagation won't work for new site. Parallel might be utilized

Installing Oracle 10g R2, Apache (2.0.54) and PHP (5.0.4) on CentOS 4.1 (RHEL 4 U1)

This article has been compiled from different pieces located in different places at OTN. My effort was only to bring
all stuff together, test it works and make easy to understand the core technology based on Instant-Client installation on the CentOS 4.1 Linux box already running Oracle10g R2 database server.Note,that if database TNSLISTENER port is different from 1521,port number should be specified in the connect string for sqlplus.


Instant Client allows you to run your applications without installing the standard Oracle client or having an ORACLE_HOME. OCI, OCCI, Pro*C, ODBC, and JDBC applications work without modification, while using significantly less disk space than before. Even SQL*Plus can be used with Instant Client. No recompile, no hassle.Customers can try new packaged applications and Oracle client features quickly without worrying about other installations. Larger enterprises can automate setup and configuration of Instant Client by using installation scripts accessing a central IT repository. Finally, everyone can benefit from the smaller footprint
Download from:-

http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/linuxsoft.html
  

Instant Client Package - Basic: All files required to run OCI, OCCI,
and JDBC-OCI Applications

oracle-instantclient-basic-10.2.0.1-1.i386.rpm
instantclient-basic-linux32-10.2.0.1-20050713.zip
  

Instant Client Package - SQL*Plus: Additional libraries and executable
for running SQL*Plus with Instant Client

oracle-instantclient-sqlplus-10.2.0.1-1.i386.rpm
instantclient-sqlplus-linux32-10.2.0.1-20050713.zip
  

Instant Client Package - SDK: Additional header files and an example makefile
for developing Oracle applications with Instant Client

oracle-instantclient-devel-10.2.0.1-1.i386.rpm
instantclient-sdk-linux32-10.2.0.1-20050713.zip
  

Install PHP, Apache and Oracle Instant Client
Installing and testing Instant Client
Run as root:-

# rpm -Uvh  oracle-instantclient-basic-10.2.0.1-1.i386.rpm
# rpm -Uvh  oracle-instantclient-sqlplus-10.2.0.1-1.i386.rpm
# rpm -Uvh oracle-instantclient-devel-10.2.0.1-1.i386.rpm
# useradd  -g oinstall -G dba orauser
# passwd orauser
   

Login as orauser.Test connection to the database:

$ export LD_LIBRARY_PATH= /usr/lib/oracle/10.2.0.1/client/lib
$ /usr/lib/oracle/10.2.0.1/client/bin/sqlplus  scott/drbrxa@//ServerORCL.informatics.dstu.net/rawdbase
SQL> exit
 

Installing and testing Apache
Login as your "orauser" user
Build Apache:

  $  bzcat httpd-2.0.54.tar.bz2  tar xf -
  $  cd httpd-2.0.54
  $  ./configure --prefix=$HOME/apache --enable-so --with-mpm=prefork
  $  make
  $ make install
  

Edit $HOME/apache/conf/httpd.conf and change the port to 8888:
Listen hostname:8888
Start Apache:

 $HOME/apache/bin/apachectl start
 

Start a browser and check that http://hostname:8888/ gives the
default Apache web page.
Stop Apache:

$HOME/apache/bin/apachectl stop
  

Installing and testing PHP
Build PHP:

$  bzcat php-5.0.4.tar.bz2  tar xf -
$  cd php-5.0.4
$  ./configure  --prefix=$HOME/php      --with-apxs2=$HOME/apache/bin/apxs     --with-config-file-path=$HOME/apache/conf      --with-oci8-instant-client= /usr/lib/oracle/10.2.0.1/client/lib     --enable-sigchild

$ make
$ make install
$ cp php.ini-recommended $HOME/apache/conf/php.ini
  

Edit php.ini and change display_errors to On:

display_errors = On

Add these lines to the $HOME/apache/conf/httpd.conf file:

AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps

Restart Apache:

 $HOME/apache/bin/apachectl   start
 

LD_LIBRARY_PATH should contains /usr/lib/oracle/10.2.0.1/client/lib before
starting Apache
Test it all works
TEST 1:
Create a file $HOME/apache/htdocs/phpinfo.php containing:

<?php
        phpinfo();
 ?>
  

Load this file in a browser:

http://hostname:8888/phpinfo.php

Check the value of LD_LIBRARY_PATH in the Environment section.
it should contain the Instant Client directory.
Check that there is a section "oci8" with OCI8 Support marked as
"enabled".

TEST 2:

Create a file $HOME/apache/htdocs/test.php containing:

<?php

  $conn = OCILogon("scott", "tiger", "//hostname:tns_listener_portnumber/orclraw");

        if (!$conn) {
          exit;
        }

        echo OCIServerVersion($conn) ."<br>\n";
        print date('Y-m-d H:i:s')."<br><br>\n";

        $query = 'SELECT * FROM EMP';

        $stid = OCIParse($conn, $query);
        OCIExecute($stid, OCI_DEFAULT);

        print '<table border="1">';
        while ($succ = OCIFetchInto($stid, $row, OCI_RETURN_NULLS)) {
          print '<tr>';
          foreach ($row as $item) {
            print '<td>'.($item?htmlentities($item):' ').'</td>';
          }
          print '</tr>';
        }
        print '</table>';

        OCILogoff($conn);
?>
  

Load this file in a browser:
http://hostname:8888/test.php

Oracle's 10g ASM implementation on CentOS 4.1 (RHEL 4 U1)

Actually there are several nice articles on Oracle Technical Network
devoted to the same topic. What’s new may be said ?
The target of publication is to highlight the optimal sequence of steps
required to bring Oracle10g (10.2.0.1) ASM-database up on CentOS4.1,
placing ASM instance and serviced databases in different Oracle Homes.
Oracleasm library install is done immediately after creating "oracle"
linux account and "dba" group to be ready for ASM Instance creating during
the first Installer run supposed to build it. ASM instance for disks and disk’s
group management is created the first by Installer along with the disk’s group
for database supposed to be built during the second run of Installer and to be
placed into recently created disk’s group.

I. Oracle 10gR2 ASM and ASMLib 2.0 I/O.

1.Install CentOS 4.1

2.Run as root:

# groupadd dba          # group of users to be granted SYSDBA system privilege
# groupadd oinstall     # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/wtfdata
# chown -R oracle.oinstall /u02
  

OTN instruction:-
Before installing Automatic Storage Management, it is recommended that you install
the optional add-on Automatic Storage Management support library, ASMLib.
ASMLib is an application program interface (API) Oracle that is aimed at simplifying
the interface between the operating system and the database, and to exploit
the capabilities and strengths of storage arrays provided by different vendors.
ASMLib provides an alternative interface for the Automatic Storage Management-enabled kernel to discover and access block devices. It provides storage and operating system vendors the opportunity to supply extended storage-related features.
These features provide benefits such as improved performance and greater data integrity.
OTN instruction ends.


3.To install ASMLIB 2.0 run as root:-

# rpm -Uvh oracleasm-2.6.9-11.ELsmp-2.0.0-1.i686.rpm    oracleasmlib-2.0.0-1.i386.rpm     oracleasm-support-2.0.0-1.i386.rpm
  

Now you get /etc/init.d/oracleasm ready to go.

Configuring the Oracle ASM library driver:-

# /etc/init.d/oracleasm configure
Default user to own the driver interface [oracle]: oracle
Default group to own the driver interface [dba]: dba
Start Oracle ASM library driver on boot (y/n) [y]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: [  OK  ]
Scanning system for ASM disks: [  OK  ]
  

# /etc/init.d/oracleasm enable
  

Create ASM disks as desired utilizing command:

# /etc/init.d/oracleasm createdisk VLM0X /dev/sdx
  

Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login, /etc/profile
and oracle's shell environment as advised in [1].

Login as oracle:-

$ cd /tmp/database
$./runInstaller
  

OTN instructions:-
It’s recommended that you install Automatic Storage Management in its own Oracle home, regardless of whether you plan to only have one or multiple database instances.
Installing Automatic Storage Management in its own Oracle home helps ensure higher
availability and manageability.With separate Oracle homes, you can upgrade Automatic Storage Management and databases independently, and you can remove database software without impacting the Automatic Storage Management instance. Ensure that the Automatic Storage Management version is the same or later than the Oracle Database version.If an Automatic Storage Management installation does not already exist and you select the Oracle Universal Installer option to install and configure Automatic Storage Management only, then Oracle Universal Installer installs Automatic Storage Management in its own Oracle home.
OTN instruction ends.



Select " Advanced installation" and create ASM instance in
$ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1

Create disk group during this run .

Exit installer.

$ ./runInstaller
  

Select " Advanced installation" and create new ASM-database placed into existing disk's group

in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_2 .
Modify ~oracle/.bash_profile correspondently. Relogin as oracle.

Next:-

$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.

Total System Global Area  285212672 bytes
Fixed Size                  1218968 bytes
Variable Size              88082024 bytes
Database Buffers          188743680 bytes
Redo Buffers                7168000 bytes
Database mounted.

SQL> alter database archivelog;
Database altered.
SQL> alter database MastDB flashback on;
Database altered.
SQL> alter database open;
Database altered.
   
  

Open Enterpise Manager console.(Enterprise Manager 10g Database Control URL

http://ServerCentOS41:1158/em). Create new disk's group for flashback

recovery area and modify corresponding value on Recovery Settings page of EM.

System startup in this case should look like:-

[oracle@ServerCentOS41 ~]$ ./lsnrstart 
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:41
Copyright (c) 1991, 2005, Oracle.  All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1521)))
------------------------
STATUS of the LISTENER
------------------------
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date                30-AUG-2005 17:57:42
Uptime                    0 days 0 hr. 0 min. 0 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File         /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
  Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully

LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:42
Copyright (c) 1991, 2005, Oracle.  All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_2/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1522)))
------------------------
STATUS of the LISTENER
------------------------
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date                30-AUG-2005 17:57:42
Uptime                    0 days 0 hr. 0 min. 0 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Listener Log File         /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening Endpoints Summary...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
  Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
   

[oracle@ServerCentOS41 ~]$ dbstart

Processing ASM instance "+ASM": log file /u01/app/oracle/product/10.2.0/db_1/startup.log
Processing Database instance "MastDB": log file /u01/app/oracle/product/10.2.0/db_2/startup.log
[oracle@ServerCentOS41 ~]$ emctl start dbconsole

TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation.  All rights reserved.
http://ServerCentOS41:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control .............. started.
-------------------------------------------------------------------------------
Logs are generated in directory /u01/app/oracle/oracle/product/10.2.0/db_2/ServerCentOS41_MastDB/sysman/log
   

Install described above was done with different Oracle Homes

for ASM instance and ASM-database.

To put ASM instance and ASM-database in same Oracle Home.

Start runInstaller just once to build all stuff at a time.

Login as oracle:-

$ cd /tmp/database
$./runInstaller
   

Select " Advanced option" and install "Software only"

in ORACLE_HOME - /u01/app/oracle/oracle/product/10.2.0/db_1.
Modify oracle's .bash_profile:-
export ORACLE_HOME and new PATH.
Source new .bash_profile:-

$. ~oracle/.bash_profile
$dbca
   

During this run the request to start CSS daemons by root will come up.

# $ORACLE_HOME/bin/localconfig add
   

ASM instance , needed disk's groups and ASM-database itself will be created.
Then perform listener and local TNS names configuration.

$netca
   

II. Oracle 10gR2 ASM and Standard Linux I/O.


This method creates Oracle database files on raw character devices managed by ASM
using standard Linux I/O system calls.It requires to create RAW devices for all
disk partitions used by ASM.


1.Install CentOS 4.1

2.Run as root:

 
# groupadd dba          # group of users to be granted SYSDBA system privilege
# groupadd oinstall     # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/data
# chown -R oracle.oinstall /u02
  

Just as an example create 4 partitions:

/dev/hda6,/dev/hdc6 5 GB each one

/dev/hda7,/dev/hdc7 3 GB each one

Create raw devices modifying file /etc/sysconfig/rawdevices as follows:

/dev/raw/raw1 /dev/hda6

/dev/raw/raw2 /dev/hdc6

/dev/raw/raw3 /dev/hda7

/dev/raw/raw4 /dev/hdc7

Put in /etc/rc.d/rc.local

chown oracle:dba /dev/raw/raw*

chmod 660 /dev/raw/raw*

I was experiencing problems with loosing "oracle:dba" permissions after Linux
reboot. Oracle's raw device came up with "root:disk" ownership after reboot.


Restart Linux

Run as root:-

# service rawdevices restart
   

Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login,

/etc/profile and oracle's shell environment as advised in [1].



Login as oracle:-

 
$ cd /tmp/database
$./runInstaller
   

Select " Advanced installation" and
create ASM instance in ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/asm
During this run create diskgroup RAWDATA1 with normal redundancy
mirroring /dev/raw/raw1 and /dev/raw/raw2.You should be fine with discovering raw devices unless permissions "oracle:dba" are lost
Exit installer.

Export ORACLE_HOME for ASM instance and corresponding PATH.
Then run "dbca" to create diskgroup RAWDATA2 with
normal redundancy mirroring /dev/raw/raw3 and /dev/raw/raw4

  
$ ./runInstaller
   

Select " Advanced installation" and create new ASM-database placed RAWDATA1 diskgroup

in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1.
Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
Next:-

  
$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area  285212672 bytes
Fixed Size                  1218968 bytes
Variable Size              88082024 bytes
Database Buffers          188743680 bytes
Redo Buffers                7168000 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database rawdbs flashback on;
Database altered.
SQL> alter database open;
Database altered.
  

Open Enterpise Manager console.(Enterprise Manager 10g Database Control

URL http://ServerCentOS41:1158/em). Put flashback recovery area in RAWDATA2

modifying corresponding value on Recovery Settings page of EM.



References.

1.www.puschitz.com/InstallingOracle10g.shtml