RDO Liberty-3 (beta) passed 3 node deployment test :
Controller+Network+Compute
Configuration ML2&OVS&VXLAN. Regardless RH is mainly focused on
RDO-Manager based Liberty deployments. I don't have desktop been able
to run 6 VMs at a time, because I truly believe that it requires 8 CORE
Intel CPU like Intel® Xeon® Processor E5-2690. On 4 CORE CPU like i7
4790 it's just impossible via my experience.
Following bellow is brief instruction for three node deployment test Controller&&Network&&Compute for oncoming RDO Liberty which was performed on Fedora 22 host with KVM/Libvirt Hypervisor (16 GB RAM, Intel Core i7-4790 Haswell CPU, ASUS Z97-P ) Three VMs (4 GB RAM,4 VCPUS) have been setup. Controller VM one (management subnet) VNIC, Network Node VM three VNICS (management,vtep's external subnets), Compute Node VM two VNICS (management,vtep's subnets)
SELINUX stays in permissive mode due to https://bugzilla.redhat.com/show_bug.cgi?id=1249685.
I avoid using default libvirt subnet 192.168.122.0/24 for any purposes related
with VM serves as RDO Kilo Nodes, by some reason it causes network congestion when forwarding packets to Internet and vice versa.
Three Libvirt networks created
# cat openstackvms.xml
<network>
<name>openstackvms</name>
<uuid>d0e9964a-f91a-40c0-b769-a609aee41bf2</uuid>
<forward mode='nat'>
<nat>
<port start='1024' end='65535'/>
</nat>
</forward>
<bridge name='virbr1' stp='on' delay='0' />
<mac address='52:54:00:60:f8:6d'/>
<ip address='192.169.142.1' netmask='255.255.255.0'>
<dhcp>
<range start='192.169.142.2' end='192.169.142.254' />
</dhcp>
</ip>
</network>
[root@junoJVC01 ~]# cat public.xml
<network>
<name>public</name>
<uuid>d0e9965b-f92c-40c1-b749-b609aed42cf2</uuid>
<forward mode='nat'>
<nat>
<port start='1024' end='65535'/>
</nat>
</forward>
<bridge name='virbr2' stp='on' delay='0' />
<mac address='52:54:00:60:f8:6d'/>
<ip address='172.24.4.225' netmask='255.255.255.240'>
<dhcp>
<range start='172.24.4.226' end='172.24.4.238' />
</dhcp>
</ip>
</network>
[root@junoJVC01 ~]# cat vteps.xml
<network>
<name>vteps</name>
<uuid>d0e9965b-f92c-40c1-b749-b609aed42cf2</uuid>
<forward mode='nat'>
<nat>
<port start='1024' end='65535'/>
</nat>
</forward>
<bridge name='virbr3' stp='on' delay='0' />
<mac address='52:54:00:60:f8:6d'/>
<ip address='10.0.0.1' netmask='255.255.255.0'>
<dhcp>
<range start='10.0.0.1' end='10.0.0.254' />
</dhcp>
</ip>
</network>
[root@junoJVC01 ~]# virsh net-list
Name State Autostart Persistent
--------------------------------------------------------------------------
default active yes yes
openstackvms active yes yes
public active yes yes
vteps active yes yes
*********************************************************************************
1. First Libvirt subnet "openstackvms" serves as management network.
All 3 VM are attached to this subnet
**********************************************************************************
2. Second Libvirt subnet "public" serves for simulation external network Network Node attached to public,latter on "eth2" interface (belongs to "public") is supposed to be converted into OVS port of br-ex on Network Node. This Libvirt subnet via bridge virbr2 172.24.4.25 provides VMs running on Compute Node access to Internet due to match to external network created by packstack installation 172.24.4.224/28.
**********************************************************************************
3. Third Libvirt subnet "vteps" serves for support VXLAN tunnel between Network and Compute nodes
**********************************************************************************
********************************
On each deployment node
********************************
Per http://beta.rdoproject.org/testday/rdo-test-day-liberty-01/
Answer file been used for deployment - answe3Node.txt
****************************************************************
[general]
CONFIG_SSH_KEY=/root/.ssh/id_rsa.pub
CONFIG_DEFAULT_PASSWORD=
CONFIG_MARIADB_INSTALL=y
CONFIG_GLANCE_INSTALL=y
CONFIG_CINDER_INSTALL=y
CONFIG_NOVA_INSTALL=y
CONFIG_NEUTRON_INSTALL=y
CONFIG_HORIZON_INSTALL=y
CONFIG_SWIFT_INSTALL=y
CONFIG_CEILOMETER_INSTALL=y
CONFIG_HEAT_INSTALL=n
CONFIG_CLIENT_INSTALL=y
CONFIG_NTP_SERVERS=
CONFIG_NAGIOS_INSTALL=y
EXCLUDE_SERVERS=
CONFIG_DEBUG_MODE=n
CONFIG_CONTROLLER_HOST=192.169.142.127
CONFIG_COMPUTE_HOSTS=192.169.142.137
CONFIG_NETWORK_HOSTS=192.169.142.147
CONFIG_VMWARE_BACKEND=n
CONFIG_UNSUPPORTED=n
CONFIG_VCENTER_HOST=
CONFIG_VCENTER_USER=
CONFIG_VCENTER_PASSWORD=
CONFIG_VCENTER_CLUSTER_NAME=
CONFIG_STORAGE_HOST=192.169.142.127
CONFIG_USE_EPEL=y
CONFIG_REPO=
CONFIG_RH_USER=
CONFIG_SATELLITE_URL=
CONFIG_RH_PW=
CONFIG_RH_OPTIONAL=y
CONFIG_RH_PROXY=
CONFIG_RH_PROXY_PORT=
CONFIG_RH_PROXY_USER=
CONFIG_RH_PROXY_PW=
CONFIG_SATELLITE_USER=
CONFIG_SATELLITE_PW=
CONFIG_SATELLITE_AKEY=
CONFIG_SATELLITE_CACERT=
CONFIG_SATELLITE_PROFILE=
CONFIG_SATELLITE_FLAGS=
CONFIG_SATELLITE_PROXY=
CONFIG_SATELLITE_PROXY_USER=
CONFIG_SATELLITE_PROXY_PW=
CONFIG_AMQP_BACKEND=rabbitmq
CONFIG_AMQP_HOST=192.169.142.127
CONFIG_AMQP_ENABLE_SSL=n
CONFIG_AMQP_ENABLE_AUTH=n
CONFIG_AMQP_NSS_CERTDB_PW=PW_PLACEHOLDER
CONFIG_AMQP_SSL_PORT=5671
CONFIG_AMQP_SSL_CERT_FILE=/etc/pki/tls/certs/amqp_selfcert.pem
CONFIG_AMQP_SSL_KEY_FILE=/etc/pki/tls/private/amqp_selfkey.pem
CONFIG_AMQP_SSL_SELF_SIGNED=y
CONFIG_AMQP_AUTH_USER=amqp_user
CONFIG_AMQP_AUTH_PASSWORD=PW_PLACEHOLDER
CONFIG_MARIADB_HOST=192.169.142.127
CONFIG_MARIADB_USER=root
CONFIG_MARIADB_PW=7207ae344ed04957
CONFIG_KEYSTONE_DB_PW=abcae16b785245c3
CONFIG_KEYSTONE_REGION=RegionOne
CONFIG_KEYSTONE_ADMIN_TOKEN=3ad2de159f9649afb0c342ba57e637d9
CONFIG_KEYSTONE_ADMIN_PW=7049f834927e4468
CONFIG_KEYSTONE_DEMO_PW=bf737b785cfa4398
CONFIG_KEYSTONE_TOKEN_FORMAT=UUID
# Here 2 options available
CONFIG_KEYSTONE_SERVICE_NAME=httpd
# CONFIG_KEYSTONE_SERVICE_NAME=keystone
CONFIG_GLANCE_DB_PW=41264fc52ffd4fe8
CONFIG_GLANCE_KS_PW=f6a9398960534797
CONFIG_GLANCE_BACKEND=file
CONFIG_CINDER_DB_PW=5ac08c6d09ba4b69
CONFIG_CINDER_KS_PW=c8cb1ecb8c2b4f6f
CONFIG_CINDER_BACKEND=lvm
CONFIG_CINDER_VOLUMES_CREATE=y
CONFIG_CINDER_VOLUMES_SIZE=5G
CONFIG_CINDER_GLUSTER_MOUNTS=
CONFIG_CINDER_NFS_MOUNTS=
CONFIG_CINDER_NETAPP_LOGIN=
CONFIG_CINDER_NETAPP_PASSWORD=
CONFIG_CINDER_NETAPP_HOSTNAME=
CONFIG_CINDER_NETAPP_SERVER_PORT=80
CONFIG_CINDER_NETAPP_STORAGE_FAMILY=ontap_cluster
CONFIG_CINDER_NETAPP_TRANSPORT_TYPE=http
CONFIG_CINDER_NETAPP_STORAGE_PROTOCOL=nfs
CONFIG_CINDER_NETAPP_SIZE_MULTIPLIER=1.0
CONFIG_CINDER_NETAPP_EXPIRY_THRES_MINUTES=720
CONFIG_CINDER_NETAPP_THRES_AVL_SIZE_PERC_START=20
CONFIG_CINDER_NETAPP_THRES_AVL_SIZE_PERC_STOP=60
CONFIG_CINDER_NETAPP_NFS_SHARES_CONFIG=
CONFIG_CINDER_NETAPP_VOLUME_LIST=
CONFIG_CINDER_NETAPP_VFILER=
CONFIG_CINDER_NETAPP_VSERVER=
CONFIG_CINDER_NETAPP_CONTROLLER_IPS=
CONFIG_CINDER_NETAPP_SA_PASSWORD=
CONFIG_CINDER_NETAPP_WEBSERVICE_PATH=/devmgr/v2
CONFIG_CINDER_NETAPP_STORAGE_POOLS=
CONFIG_NOVA_DB_PW=1e1b5aeeeaf342a8
CONFIG_NOVA_KS_PW=d9583177a2444f06
CONFIG_NOVA_SCHED_CPU_ALLOC_RATIO=16.0
CONFIG_NOVA_SCHED_RAM_ALLOC_RATIO=1.5
CONFIG_NOVA_COMPUTE_MIGRATE_PROTOCOL=tcp
CONFIG_NOVA_COMPUTE_PRIVIF=eth1
CONFIG_NOVA_NETWORK_MANAGER=nova.network.manager.FlatDHCPManager
CONFIG_NOVA_NETWORK_PUBIF=eth0
CONFIG_NOVA_NETWORK_PRIVIF=eth1
CONFIG_NOVA_NETWORK_FIXEDRANGE=192.168.32.0/22
CONFIG_NOVA_NETWORK_FLOATRANGE=10.3.4.0/22
CONFIG_NOVA_NETWORK_DEFAULTFLOATINGPOOL=nova
CONFIG_NOVA_NETWORK_AUTOASSIGNFLOATINGIP=n
CONFIG_NOVA_NETWORK_VLAN_START=100
CONFIG_NOVA_NETWORK_NUMBER=1
CONFIG_NOVA_NETWORK_SIZE=255
CONFIG_NEUTRON_KS_PW=808e36e154bd4cee
CONFIG_NEUTRON_DB_PW=0e2b927a21b44737
CONFIG_NEUTRON_L3_EXT_BRIDGE=br-ex
CONFIG_NEUTRON_L2_PLUGIN=ml2
CONFIG_NEUTRON_METADATA_PW=a965cd23ed2f4502
CONFIG_LBAAS_INSTALL=n
CONFIG_NEUTRON_METERING_AGENT_INSTALL=n
CONFIG_NEUTRON_FWAAS=n
CONFIG_NEUTRON_ML2_TYPE_DRIVERS=vxlan
CONFIG_NEUTRON_ML2_TENANT_NETWORK_TYPES=vxlan
CONFIG_NEUTRON_ML2_MECHANISM_DRIVERS=openvswitch
CONFIG_NEUTRON_ML2_FLAT_NETWORKS=*
CONFIG_NEUTRON_ML2_VLAN_RANGES=
CONFIG_NEUTRON_ML2_TUNNEL_ID_RANGES=1001:2000
CONFIG_NEUTRON_ML2_VXLAN_GROUP=239.1.1.2
CONFIG_NEUTRON_ML2_VNI_RANGES=1001:2000
CONFIG_NEUTRON_L2_AGENT=openvswitch
CONFIG_NEUTRON_LB_TENANT_NETWORK_TYPE=local
CONFIG_NEUTRON_LB_VLAN_RANGES=
CONFIG_NEUTRON_LB_INTERFACE_MAPPINGS=
CONFIG_NEUTRON_OVS_TENANT_NETWORK_TYPE=vxlan
CONFIG_NEUTRON_OVS_VLAN_RANGES=
CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS=physnet1:br-ex
CONFIG_NEUTRON_OVS_BRIDGE_IFACES=
CONFIG_NEUTRON_OVS_TUNNEL_RANGES=1001:2000
CONFIG_NEUTRON_OVS_TUNNEL_IF=eth1
CONFIG_NEUTRON_OVS_VXLAN_UDP_PORT=4789
CONFIG_HORIZON_SSL=n
CONFIG_SSL_CERT=
CONFIG_SSL_KEY=
CONFIG_SSL_CACHAIN=
CONFIG_SWIFT_KS_PW=8f75bfd461234c30
CONFIG_SWIFT_STORAGES=
CONFIG_SWIFT_STORAGE_ZONES=1
CONFIG_SWIFT_STORAGE_REPLICAS=1
CONFIG_SWIFT_STORAGE_FSTYPE=ext4
CONFIG_SWIFT_HASH=a60aacbedde7429a
CONFIG_SWIFT_STORAGE_SIZE=2G
CONFIG_PROVISION_DEMO=y
CONFIG_PROVISION_TEMPEST=n
CONFIG_PROVISION_TEMPEST_USER=
CONFIG_PROVISION_TEMPEST_USER_PW=44faa4ebc3da4459
CONFIG_PROVISION_DEMO_FLOATRANGE=172.24.4.224/28
CONFIG_PROVISION_TEMPEST_REPO_URI=https://github.com/openstack/tempest.git
CONFIG_PROVISION_TEMPEST_REPO_REVISION=master
CONFIG_PROVISION_ALL_IN_ONE_OVS_BRIDGE=n
CONFIG_HEAT_DB_PW=PW_PLACEHOLDER
CONFIG_HEAT_AUTH_ENC_KEY=fc3fb7fee61e46b0
CONFIG_HEAT_KS_PW=PW_PLACEHOLDER
CONFIG_HEAT_CLOUDWATCH_INSTALL=n
CONFIG_HEAT_USING_TRUSTS=y
CONFIG_HEAT_CFN_INSTALL=n
CONFIG_HEAT_DOMAIN=heat
CONFIG_HEAT_DOMAIN_ADMIN=heat_admin
CONFIG_HEAT_DOMAIN_PASSWORD=PW_PLACEHOLDER
CONFIG_CEILOMETER_SECRET=19ae0e7430174349
CONFIG_CEILOMETER_KS_PW=337b08d4b3a44753
CONFIG_MONGODB_HOST=192.169.142.127
CONFIG_NAGIOS_PW=02f168ee8edd44e4
***************************************************************************
First time run
# packstack --answer-file=./answe3Node.txt
with CONFIG_PROVISION_DEMO=y
It will crash running IP_provision_glance.pp
Then switch to CONFIG_PROVISION_DEMO=n
and rerun `packstack --answer-file=./answe3Node.txt`
**********************************************************************************
Up on packstack completion on Network Node create following files ,
designed to match created by installer external network
**********************************************************************************
[root@ip-192-169-142-147 network-scripts]# cat ifcfg-br-ex
DEVICE="br-ex"
BOOTPROTO="static"
IPADDR="172.24.4.235"
NETMASK="255.255.255.240"
DNS1="83.221.202.254"
BROADCAST="172.24.4.239"
GATEWAY="172.24.4.225"
NM_CONTROLLED="no"
TYPE="OVSIntPort"
OVS_BRIDGE=br-ex
DEVICETYPE="ovs"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="yes"
IPV6INIT=no
[root@ip-192-169-142-147 network-scripts]# cat ifcfg-eth2
DEVICE="eth2"
ONBOOT="yes"
TYPE="OVSPort"
DEVICETYPE="ovs"
OVS_BRIDGE=br-ex
NM_CONTROLLED=no
IPV6INIT=no
*************************************************
Next step to performed on Network Node :-
*************************************************
# chkconfig network on
# systemctl stop NetworkManager
# systemctl disable NetworkManager
# service network restart
OVS PORT should be eth2 (third Ethernet interface on Network Node)
Controller node snapshot
Network node snapshot
Running CentOS 7.1 cloud VM
Running Fedora 22 cloud VM
Links session running inside VF22Devs15 cloud VM
Following bellow is brief instruction for three node deployment test Controller&&Network&&Compute for oncoming RDO Liberty which was performed on Fedora 22 host with KVM/Libvirt Hypervisor (16 GB RAM, Intel Core i7-4790 Haswell CPU, ASUS Z97-P ) Three VMs (4 GB RAM,4 VCPUS) have been setup. Controller VM one (management subnet) VNIC, Network Node VM three VNICS (management,vtep's external subnets), Compute Node VM two VNICS (management,vtep's subnets)
SELINUX stays in permissive mode due to https://bugzilla.redhat.com/show_bug.cgi?id=1249685.
I avoid using default libvirt subnet 192.168.122.0/24 for any purposes related
with VM serves as RDO Kilo Nodes, by some reason it causes network congestion when forwarding packets to Internet and vice versa.
Three Libvirt networks created
# cat openstackvms.xml
<network>
<name>openstackvms</name>
<uuid>d0e9964a-f91a-40c0-b769-a609aee41bf2</uuid>
<forward mode='nat'>
<nat>
<port start='1024' end='65535'/>
</nat>
</forward>
<bridge name='virbr1' stp='on' delay='0' />
<mac address='52:54:00:60:f8:6d'/>
<ip address='192.169.142.1' netmask='255.255.255.0'>
<dhcp>
<range start='192.169.142.2' end='192.169.142.254' />
</dhcp>
</ip>
</network>
[root@junoJVC01 ~]# cat public.xml
<network>
<name>public</name>
<uuid>d0e9965b-f92c-40c1-b749-b609aed42cf2</uuid>
<forward mode='nat'>
<nat>
<port start='1024' end='65535'/>
</nat>
</forward>
<bridge name='virbr2' stp='on' delay='0' />
<mac address='52:54:00:60:f8:6d'/>
<ip address='172.24.4.225' netmask='255.255.255.240'>
<dhcp>
<range start='172.24.4.226' end='172.24.4.238' />
</dhcp>
</ip>
</network>
[root@junoJVC01 ~]# cat vteps.xml
<network>
<name>vteps</name>
<uuid>d0e9965b-f92c-40c1-b749-b609aed42cf2</uuid>
<forward mode='nat'>
<nat>
<port start='1024' end='65535'/>
</nat>
</forward>
<bridge name='virbr3' stp='on' delay='0' />
<mac address='52:54:00:60:f8:6d'/>
<ip address='10.0.0.1' netmask='255.255.255.0'>
<dhcp>
<range start='10.0.0.1' end='10.0.0.254' />
</dhcp>
</ip>
</network>
[root@junoJVC01 ~]# virsh net-list
Name State Autostart Persistent
--------------------------------------------------------------------------
default active yes yes
openstackvms active yes yes
public active yes yes
vteps active yes yes
*********************************************************************************
1. First Libvirt subnet "openstackvms" serves as management network.
All 3 VM are attached to this subnet
**********************************************************************************
2. Second Libvirt subnet "public" serves for simulation external network Network Node attached to public,latter on "eth2" interface (belongs to "public") is supposed to be converted into OVS port of br-ex on Network Node. This Libvirt subnet via bridge virbr2 172.24.4.25 provides VMs running on Compute Node access to Internet due to match to external network created by packstack installation 172.24.4.224/28.
**********************************************************************************
3. Third Libvirt subnet "vteps" serves for support VXLAN tunnel between Network and Compute nodes
**********************************************************************************
********************************
On each deployment node
********************************
Per http://beta.rdoproject.org/testday/rdo-test-day-liberty-01/
cd /etc/yum.repos.d/
sudo wget http://trunk.rdoproject.org/centos7/delorean-deps.repo
sudo wget http://trunk.rdoproject.org/centos7/current/delorean.repoAnswer file been used for deployment - answe3Node.txt
****************************************************************
[general]
CONFIG_SSH_KEY=/root/.ssh/id_rsa.pub
CONFIG_DEFAULT_PASSWORD=
CONFIG_MARIADB_INSTALL=y
CONFIG_GLANCE_INSTALL=y
CONFIG_CINDER_INSTALL=y
CONFIG_NOVA_INSTALL=y
CONFIG_NEUTRON_INSTALL=y
CONFIG_HORIZON_INSTALL=y
CONFIG_SWIFT_INSTALL=y
CONFIG_CEILOMETER_INSTALL=y
CONFIG_HEAT_INSTALL=n
CONFIG_CLIENT_INSTALL=y
CONFIG_NTP_SERVERS=
CONFIG_NAGIOS_INSTALL=y
EXCLUDE_SERVERS=
CONFIG_DEBUG_MODE=n
CONFIG_CONTROLLER_HOST=192.169.142.127
CONFIG_COMPUTE_HOSTS=192.169.142.137
CONFIG_NETWORK_HOSTS=192.169.142.147
CONFIG_VMWARE_BACKEND=n
CONFIG_UNSUPPORTED=n
CONFIG_VCENTER_HOST=
CONFIG_VCENTER_USER=
CONFIG_VCENTER_PASSWORD=
CONFIG_VCENTER_CLUSTER_NAME=
CONFIG_STORAGE_HOST=192.169.142.127
CONFIG_USE_EPEL=y
CONFIG_REPO=
CONFIG_RH_USER=
CONFIG_SATELLITE_URL=
CONFIG_RH_PW=
CONFIG_RH_OPTIONAL=y
CONFIG_RH_PROXY=
CONFIG_RH_PROXY_PORT=
CONFIG_RH_PROXY_USER=
CONFIG_RH_PROXY_PW=
CONFIG_SATELLITE_USER=
CONFIG_SATELLITE_PW=
CONFIG_SATELLITE_AKEY=
CONFIG_SATELLITE_CACERT=
CONFIG_SATELLITE_PROFILE=
CONFIG_SATELLITE_FLAGS=
CONFIG_SATELLITE_PROXY=
CONFIG_SATELLITE_PROXY_USER=
CONFIG_SATELLITE_PROXY_PW=
CONFIG_AMQP_BACKEND=rabbitmq
CONFIG_AMQP_HOST=192.169.142.127
CONFIG_AMQP_ENABLE_SSL=n
CONFIG_AMQP_ENABLE_AUTH=n
CONFIG_AMQP_NSS_CERTDB_PW=PW_PLACEHOLDER
CONFIG_AMQP_SSL_PORT=5671
CONFIG_AMQP_SSL_CERT_FILE=/etc/pki/tls/certs/amqp_selfcert.pem
CONFIG_AMQP_SSL_KEY_FILE=/etc/pki/tls/private/amqp_selfkey.pem
CONFIG_AMQP_SSL_SELF_SIGNED=y
CONFIG_AMQP_AUTH_USER=amqp_user
CONFIG_AMQP_AUTH_PASSWORD=PW_PLACEHOLDER
CONFIG_MARIADB_HOST=192.169.142.127
CONFIG_MARIADB_USER=root
CONFIG_MARIADB_PW=7207ae344ed04957
CONFIG_KEYSTONE_DB_PW=abcae16b785245c3
CONFIG_KEYSTONE_REGION=RegionOne
CONFIG_KEYSTONE_ADMIN_TOKEN=3ad2de159f9649afb0c342ba57e637d9
CONFIG_KEYSTONE_ADMIN_PW=7049f834927e4468
CONFIG_KEYSTONE_DEMO_PW=bf737b785cfa4398
CONFIG_KEYSTONE_TOKEN_FORMAT=UUID
# Here 2 options available
CONFIG_KEYSTONE_SERVICE_NAME=httpd
# CONFIG_KEYSTONE_SERVICE_NAME=keystone
CONFIG_GLANCE_DB_PW=41264fc52ffd4fe8
CONFIG_GLANCE_KS_PW=f6a9398960534797
CONFIG_GLANCE_BACKEND=file
CONFIG_CINDER_DB_PW=5ac08c6d09ba4b69
CONFIG_CINDER_KS_PW=c8cb1ecb8c2b4f6f
CONFIG_CINDER_BACKEND=lvm
CONFIG_CINDER_VOLUMES_CREATE=y
CONFIG_CINDER_VOLUMES_SIZE=5G
CONFIG_CINDER_GLUSTER_MOUNTS=
CONFIG_CINDER_NFS_MOUNTS=
CONFIG_CINDER_NETAPP_LOGIN=
CONFIG_CINDER_NETAPP_PASSWORD=
CONFIG_CINDER_NETAPP_HOSTNAME=
CONFIG_CINDER_NETAPP_SERVER_PORT=80
CONFIG_CINDER_NETAPP_STORAGE_FAMILY=ontap_cluster
CONFIG_CINDER_NETAPP_TRANSPORT_TYPE=http
CONFIG_CINDER_NETAPP_STORAGE_PROTOCOL=nfs
CONFIG_CINDER_NETAPP_SIZE_MULTIPLIER=1.0
CONFIG_CINDER_NETAPP_EXPIRY_THRES_MINUTES=720
CONFIG_CINDER_NETAPP_THRES_AVL_SIZE_PERC_START=20
CONFIG_CINDER_NETAPP_THRES_AVL_SIZE_PERC_STOP=60
CONFIG_CINDER_NETAPP_NFS_SHARES_CONFIG=
CONFIG_CINDER_NETAPP_VOLUME_LIST=
CONFIG_CINDER_NETAPP_VFILER=
CONFIG_CINDER_NETAPP_VSERVER=
CONFIG_CINDER_NETAPP_CONTROLLER_IPS=
CONFIG_CINDER_NETAPP_SA_PASSWORD=
CONFIG_CINDER_NETAPP_WEBSERVICE_PATH=/devmgr/v2
CONFIG_CINDER_NETAPP_STORAGE_POOLS=
CONFIG_NOVA_DB_PW=1e1b5aeeeaf342a8
CONFIG_NOVA_KS_PW=d9583177a2444f06
CONFIG_NOVA_SCHED_CPU_ALLOC_RATIO=16.0
CONFIG_NOVA_SCHED_RAM_ALLOC_RATIO=1.5
CONFIG_NOVA_COMPUTE_MIGRATE_PROTOCOL=tcp
CONFIG_NOVA_COMPUTE_PRIVIF=eth1
CONFIG_NOVA_NETWORK_MANAGER=nova.network.manager.FlatDHCPManager
CONFIG_NOVA_NETWORK_PUBIF=eth0
CONFIG_NOVA_NETWORK_PRIVIF=eth1
CONFIG_NOVA_NETWORK_FIXEDRANGE=192.168.32.0/22
CONFIG_NOVA_NETWORK_FLOATRANGE=10.3.4.0/22
CONFIG_NOVA_NETWORK_DEFAULTFLOATINGPOOL=nova
CONFIG_NOVA_NETWORK_AUTOASSIGNFLOATINGIP=n
CONFIG_NOVA_NETWORK_VLAN_START=100
CONFIG_NOVA_NETWORK_NUMBER=1
CONFIG_NOVA_NETWORK_SIZE=255
CONFIG_NEUTRON_KS_PW=808e36e154bd4cee
CONFIG_NEUTRON_DB_PW=0e2b927a21b44737
CONFIG_NEUTRON_L3_EXT_BRIDGE=br-ex
CONFIG_NEUTRON_L2_PLUGIN=ml2
CONFIG_NEUTRON_METADATA_PW=a965cd23ed2f4502
CONFIG_LBAAS_INSTALL=n
CONFIG_NEUTRON_METERING_AGENT_INSTALL=n
CONFIG_NEUTRON_FWAAS=n
CONFIG_NEUTRON_ML2_TYPE_DRIVERS=vxlan
CONFIG_NEUTRON_ML2_TENANT_NETWORK_TYPES=vxlan
CONFIG_NEUTRON_ML2_MECHANISM_DRIVERS=openvswitch
CONFIG_NEUTRON_ML2_FLAT_NETWORKS=*
CONFIG_NEUTRON_ML2_VLAN_RANGES=
CONFIG_NEUTRON_ML2_TUNNEL_ID_RANGES=1001:2000
CONFIG_NEUTRON_ML2_VXLAN_GROUP=239.1.1.2
CONFIG_NEUTRON_ML2_VNI_RANGES=1001:2000
CONFIG_NEUTRON_L2_AGENT=openvswitch
CONFIG_NEUTRON_LB_TENANT_NETWORK_TYPE=local
CONFIG_NEUTRON_LB_VLAN_RANGES=
CONFIG_NEUTRON_LB_INTERFACE_MAPPINGS=
CONFIG_NEUTRON_OVS_TENANT_NETWORK_TYPE=vxlan
CONFIG_NEUTRON_OVS_VLAN_RANGES=
CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS=physnet1:br-ex
CONFIG_NEUTRON_OVS_BRIDGE_IFACES=
CONFIG_NEUTRON_OVS_TUNNEL_RANGES=1001:2000
CONFIG_NEUTRON_OVS_TUNNEL_IF=eth1
CONFIG_NEUTRON_OVS_VXLAN_UDP_PORT=4789
CONFIG_HORIZON_SSL=n
CONFIG_SSL_CERT=
CONFIG_SSL_KEY=
CONFIG_SSL_CACHAIN=
CONFIG_SWIFT_KS_PW=8f75bfd461234c30
CONFIG_SWIFT_STORAGES=
CONFIG_SWIFT_STORAGE_ZONES=1
CONFIG_SWIFT_STORAGE_REPLICAS=1
CONFIG_SWIFT_STORAGE_FSTYPE=ext4
CONFIG_SWIFT_HASH=a60aacbedde7429a
CONFIG_SWIFT_STORAGE_SIZE=2G
CONFIG_PROVISION_DEMO=y
CONFIG_PROVISION_TEMPEST=n
CONFIG_PROVISION_TEMPEST_USER=
CONFIG_PROVISION_TEMPEST_USER_PW=44faa4ebc3da4459
CONFIG_PROVISION_DEMO_FLOATRANGE=172.24.4.224/28
CONFIG_PROVISION_TEMPEST_REPO_URI=https://github.com/openstack/tempest.git
CONFIG_PROVISION_TEMPEST_REPO_REVISION=master
CONFIG_PROVISION_ALL_IN_ONE_OVS_BRIDGE=n
CONFIG_HEAT_DB_PW=PW_PLACEHOLDER
CONFIG_HEAT_AUTH_ENC_KEY=fc3fb7fee61e46b0
CONFIG_HEAT_KS_PW=PW_PLACEHOLDER
CONFIG_HEAT_CLOUDWATCH_INSTALL=n
CONFIG_HEAT_USING_TRUSTS=y
CONFIG_HEAT_CFN_INSTALL=n
CONFIG_HEAT_DOMAIN=heat
CONFIG_HEAT_DOMAIN_ADMIN=heat_admin
CONFIG_HEAT_DOMAIN_PASSWORD=PW_PLACEHOLDER
CONFIG_CEILOMETER_SECRET=19ae0e7430174349
CONFIG_CEILOMETER_KS_PW=337b08d4b3a44753
CONFIG_MONGODB_HOST=192.169.142.127
CONFIG_NAGIOS_PW=02f168ee8edd44e4
***************************************************************************
First time run
# packstack --answer-file=./answe3Node.txt
with CONFIG_PROVISION_DEMO=y
It will crash running IP_provision_glance.pp
Then switch to CONFIG_PROVISION_DEMO=n
and rerun `packstack --answer-file=./answe3Node.txt`
**********************************************************************************
Up on packstack completion on Network Node create following files ,
designed to match created by installer external network
**********************************************************************************
[root@ip-192-169-142-147 network-scripts]# cat ifcfg-br-ex
DEVICE="br-ex"
BOOTPROTO="static"
IPADDR="172.24.4.235"
NETMASK="255.255.255.240"
DNS1="83.221.202.254"
BROADCAST="172.24.4.239"
GATEWAY="172.24.4.225"
NM_CONTROLLED="no"
TYPE="OVSIntPort"
OVS_BRIDGE=br-ex
DEVICETYPE="ovs"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="yes"
IPV6INIT=no
[root@ip-192-169-142-147 network-scripts]# cat ifcfg-eth2
DEVICE="eth2"
ONBOOT="yes"
TYPE="OVSPort"
DEVICETYPE="ovs"
OVS_BRIDGE=br-ex
NM_CONTROLLED=no
IPV6INIT=no
*************************************************
Next step to performed on Network Node :-
*************************************************
# chkconfig network on
# systemctl stop NetworkManager
# systemctl disable NetworkManager
# service network restart
OVS PORT should be eth2 (third Ethernet interface on Network Node)
Controller node snapshot
Network node snapshot
Running Fedora 22 cloud VM
Links session running inside VF22Devs15 cloud VM
Verification access to Nova-metadata server from within VF22Devs15 VM
